How can i specifically zoom in vertical side

Ask or learn about how to use the software or troubleshoot problems
Post Reply
deepakojha86
Posts: 1
Joined: July 6th, 2016, 1:19 am

How can i specifically zoom in vertical side

Post by deepakojha86 » July 6th, 2016, 1:26 am

I have used a modulation period of 1.55 seconds for analysis. The GC image height is very small that it can not be interpreted. The axis units are time (s) on both side. If i am using the height fit the image is zoomed multiple times covering a very small time fractions on the x- axis (colum-1 retention time). suggest me some fix? If you want i can share some results too.

qtao
Posts: 156
Joined: October 7th, 2011, 10:16 am

Re: How can i specifically zoom in vertical side

Post by qtao » July 8th, 2016, 9:01 am

The simplest way is to resize the Image Viewer window and then Fit View.

Note that Fit View will change the aspect ratio of the image. If you want to keep the original aspect ratio, you can choose from 2X to 8X, or type in the scale you prefer.

If you want to control what shown precisely, you can use View > Set Viewport. More details can be found here

ghudson621
Posts: 1
Joined: July 9th, 2016, 1:35 am

Re: How can i specifically zoom in vertical side

Post by ghudson621 » July 9th, 2016, 1:42 am

Resize it in ImageViewer :)

Post Reply